Inthis guide, we will show the recommended video settings for Hikvision cameras in the most common scenarios. This will help you increase the performance and efficacy of the camera while getting the best image and optimizing the storage. The Hikvision video settings come in three types: Main Stream: This is the stream that is recorded on the Thisstep is the least difficult and cheapest to perform, one only has to remove power, wait 10 or 15 seconds, and then restore power. 2. Ping the camera and discover it: Type "cmd" into the Windows search box to open a DOS command prompt and the use the "ping" command to see if you can connect to the camera.

Inthis video, I will guide you to set a static IP address for IMOU camera Thanks for watching. Help me 100K subscribers!

Theprocess of connecting a 3rd-party camera directly is slightly trickier though as the 3rd-party cameras will not support the auto-assign/Plug & Play feature of the Hikvision cameras, this means you first have to add the 3rd-party camera to your network using a PoE switch or Injector and then change the cameras IP address to match the subnet
Inthe DVR camera management screen, click on " Custom Adding ". In the next screen just add your IP camera information as shown below: As you can see in the picture above, I have included the following information: IP camera Address: . Protocol: ONVIF. Management port: 8899. Transfer protocol: Auto. Username: admin.

Atfirst I thought it might just be resizing the sub stream, but on comparison of a snapshot from the camera itself and the NVR, it appears to be the real deal. Click to expand 101 will get the main stream; 102 will get the substream.

Pu4r. 91 71 464 103 315 197 7 265 5

how to set ip address in hikvision camera